TOB TOB-192-10L Charge Discharge Machine For Battery Forming And Grading (192 Channels 5V10A)

Channel No.: 192

Workflow control method: Whole Cabin control

Charging model: Constant voltage,constant current

Charge cutoff condition: Voltage, current, time, capacity

Discharge mode: Constant current

Discharge cutoff condition: Voltage, time, capacity

Sampling inspection cycle: ≤6s

Voltage measurement range: 0~5V，Resolution 1mV

Battery voltage range: Charge：0~4.5V，Discharge：4.5~2V

Constant voltage range: 3~4.5V

Voltage accuracy: ±（0.05%RD+0.1%FS）

Current range: Charge:0.05-10A，Discharge :0.05-10A，Resolution:1mA

Current accuracy: ±（0.1%RD+0.1%FS）

Time Set Range: Any setting within 0~30000 minutes, the time unit is min

Time accuracy: ≤±0.1%

Clamp type: Four-wire method fixture

Clamp adjust range: 10mm-125mm

Support battery type: Cylinder cell

Voltage source: 3 phase 4 wire ， AC380V±5% ， 50HZ ， Power consumption15KW

communication method: RS485，Baud rate 57600

Machine size: 1680mm（length）×600mm（width）×1710mm（height

working environment: Temperature：0-40℃，related temperature≤85%

Full load operating current: Phase line up to 18A, zero line up to 30A

Device startup current: Air switch closing moment about 60A

N.W: About 350kg