For full functionality of this site it is necessary to enable JavaScript.

Máy thử nghiệm cao áp KEP HVTS-70/50 (AC50KV/ DC70KV, hiển thị số, khí SF6)

Hãng sản xuất : KEP
Xuất xứ EU
Model: HVTS-70/50
Bảo hành: 12 tháng

Dùng để thử nghiệm cách điện của cáp điện và các chất điện môi rắn

Hiển thị số
Nguồn cung cấp dòng điện xoay chiều: 220 VAC ± 22
Tần số: 50 Hz ± 2
Công suất tiêu thụ lớn nhất: 3 KW
Điện áp ra cao nhất:
- AC: 50 KV
- DC : 70 KV
Dòng điện ra lớn nhất, :
- Đối với điện áp AC:  45mA
- đối với điện áp DC:  20 mA
Sai số điện áp tương đối,
- Điện áp AC 3 kV đến 50 kV: ± 3 %:
- Điện áp DC 3 kV đến 70 kV: ± 3 %:
Sai số dòng điện tương đối
- Dòng điện AC 1,0 mA đến 45,0 mA: ± 3 mA
- Dòng điện DC 0,1 mA đến 20 mA: ± 3 mA
Chế độ: bằng tay/ tự động
Cấp điện áp tăng: 1-9 % / s
Ngưỡng điện áp tối đa:
 - Đối với điện áp AC: 52 KV
 - Đối với điện áp DC: 72 KV
Ngưỡng dòng điện của nguồn cấp max: 10 A
Lập trình thời gian, min, max: 10
Lưu trữ kết quả kiểm tra: số lượng 32 giá trị
Kích thước bộ điều khiển max: 266×240×354 mm
Trọng lượng bộ điều khiển max: 14 kg
Kích thước bộ BVIEG (HVU-G) : 355×325×350 mm
Trọng lượng bộ BVIEG (HVU-G): 23 kg
Tuổi thọ trung bình: 10 năm
Cung cấp bao gồm
Bộ điều khiển:  1 cái
Bộ cao áp (BVIEG): 1 cái
Cáp nguồn (2 m, tiết diện 3x0,75 mm2): 1
Dây nối đất (4 m, tiết diện 4 mm2): 2
Dây cao áp (4 m), Utest ≤ 25kV: 1
Cáp kết nối bộ điều khiển (3 m): 2
Cầu chì VP2 -1, 1.0 A: 2 cái
Cầu chì VP3 -1, 10.0 A: 2 cái
HDSD: 1 cái

Chi tiết

Datasheet

 

 

High voltage test system HVTS-70/50 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 50 kV at 50Hz frequency in accordance with GOST 1516.2.

Main advantages 

HVTS-70/50 is portable equipment. The control unit is enclosed in high-impact plastic case with a handy strap.

The test system HVTS-70/50 is:

- Supplies the high voltage test on the object and control of leakage current;

- Ensures high accuracy and maintenance of the test voltage at a certain level, it is possible to adjust the leakage current with an external capacitor additional DC voltage during the test;

- Measures the voltage directly at the load, allowing you to have a real idea about the stress tests on the object and control it with the specified accuracy. In addition, significantly increasing the safety of the staff, especially when removing the residual capacitive charge when disconnecting the high voltage;

- Made in a sealed enclosure provides protection for remote control from dust and moisture, which is especially important when using the machine in the field;

- Equipped with a modern system of removal of residual capacitive charge using the secondary winding of the transformer and has an optional external shorting;

- A protection scheme on excess input and output current limit and set the output voltage exceeds the set. HVTS-70/50 has the ability to program required for a particular test value of the maximum current and maximum voltage protection circuitry;

- High voltage unit has a built-in pressure sensors and temperature sulfur hexafluoride transformer with output of their state on the graphic display;

- The ability to save the settings of the eight most commonly performed types of testing (insulators, surge protectors, switches, cables, 6.3 kV, 10 kV cables, etc.);

- Display all the necessary information on the specifications and test results on a graphical display. During the test, shows the numerical values ​​of the test voltage (rms), test current (rms) and the timer duration of the test. Additionally displays the voltage (amplitude), the shape factor for AC voltage or crest factor for the rectified voltage. An estimation of the dynamics of changes in the test parameters displayed a linear scale display of voltage and current;

- A choice between manual and automatic operation. The latter involves the installation of the operator values ​​of the test voltage in steps of 0.1 kV, lifting speed of the test voltage, the voltage test current protection operation time of the test;

- Preservation of the non-volatile memory of archival records of tests carried out with information about the time of the test, the averaged voltage at the facility and the leakage current;

- The ability to work remotely - reading the archived data on the tests carried out, the setting and the choice of test parameters, workflow management

 

  • Technical Specifications

Parameter

Value 

Supply voltage single-phase AC current, V 

220 ± 22

Frequency, Hz

50 ± 2

Highest power consumption, kW, max 

3

Highest output voltage, kV: 

- AC

50

- DC 

70

Highest output current, mA: 

- on an AC voltage 

45

- on the DC voltage 

20

Relative error voltage, %: 

- AC voltage from 3 kV to 50 kV 

± 3

- DC voltage of 3 kV to 70 kV 

± 3

Relative error of current measuring, %: 

- AC current of 1,0 mA to 45,0 mA 

± 3

- DC current of 0,1 mA to 20 mA 

± 3

Modes

manual / auto

Rate of voltage increase, % / s 

1-9

Maximum voltage threshold, kV:

 - on an AC voltage 

52

 - on the DC voltage 

72

Treshold current ofr the power supply, A, max 

10

Programmable timer, min, max

10

Archiving of test results, quantity

32

Сontrol Unit dimensions, mm, max 

 266×240×354

Сontrol Unit Weight, kg, max 

14

BVIEG (HVU-G) dimensions, mm, max 

355×325×350

BVIEG (HVU-G) Weight, kg, max 

23

Lifespan, years, average 

10

  • Operating Conditions

The device is designed for an indoors operation under the following conditions:

Condition

Value

Air temperature, °С

from -10 to +40

Relative humidity, %, up to

98 at +25 °С

Atmospheric pressure, kPa (mm hg)

84,0 – 106,7 (630 – 800)

  • Package Contents

Component

Quantity

Control Unit

1

High Voltage Unit (BVIEG) 

1

Power cable (2 m, cross section 3x0,75 mm2)

1

Ground wire (4 m, cross-section 4 mm2)

2

High-Voltage wire (4 m), Utest ≤ 25kV

1

Control Unit cable connection (3 m) 

2

Fuse VP2 -1, 1.0 A

2

Fuse VP3 -1, 10.0 A

2

 

Documentation

Manual

1

Passport

1

Metrological certification of GP "Kharkivstandartmetrologiya"

 

 

 

 

 

High voltage test system HVTS-70/50 is designed for testing the insulating properties of power cables and solid dielectrics with a rectified voltage of up to 70 kV, and solid dielectrics with sine-wave voltage of up to 50 kV at 50Hz frequency in accordance with GOST 1516.2.

Main advantages 

HVTS-70/50 is portable equipment. The control unit is enclosed in high-impact plastic case with a handy strap.

The test system HVTS-70/50 is:

- Supplies the high voltage test on the object and control of leakage current;

- Ensures high accuracy and maintenance of the test voltage at a certain level, it is possible to adjust the leakage current with an external capacitor additional DC voltage during the test;

- Measures the voltage directly at the load, allowing you to have a real idea about the stress tests on the object and control it with the specified accuracy. In addition, significantly increasing the safety of the staff, especially when removing the residual capacitive charge when disconnecting the high voltage;

- Made in a sealed enclosure provides protection for remote control from dust and moisture, which is especially important when using the machine in the field;

- Equipped with a modern system of removal of residual capacitive charge using the secondary winding of the transformer and has an optional external shorting;

- A protection scheme on excess input and output current limit and set the output voltage exceeds the set. HVTS-70/50 has the ability to program required for a particular test value of the maximum current and maximum voltage protection circuitry;

- High voltage unit has a built-in pressure sensors and temperature sulfur hexafluoride transformer with output of their state on the graphic display;

- The ability to save the settings of the eight most commonly performed types of testing (insulators, surge protectors, switches, cables, 6.3 kV, 10 kV cables, etc.);

- Display all the necessary information on the specifications and test results on a graphical display. During the test, shows the numerical values ​​of the test voltage (rms), test current (rms) and the timer duration of the test. Additionally displays the voltage (amplitude), the shape factor for AC voltage or crest factor for the rectified voltage. An estimation of the dynamics of changes in the test parameters displayed a linear scale display of voltage and current;

- A choice between manual and automatic operation. The latter involves the installation of the operator values ​​of the test voltage in steps of 0.1 kV, lifting speed of the test voltage, the voltage test current protection operation time of the test;

- Preservation of the non-volatile memory of archival records of tests carried out with information about the time of the test, the averaged voltage at the facility and the leakage current;

- The ability to work remotely - reading the archived data on the tests carried out, the setting and the choice of test parameters, workflow management

 

  • Technical Specifications

Parameter

Value 

Supply voltage single-phase AC current, V 

220 ± 22

Frequency, Hz

50 ± 2

Highest power consumption, kW, max 

3

Highest output voltage, kV: 

- AC

50

- DC 

70

Highest output current, mA: 

- on an AC voltage 

45

- on the DC voltage 

<p align="center" st
  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi