Suneast E-FLOW-Z 钎焊炉 (50~350mm, 5050x1420x1750mm)

External spraying

Dimension：LxWxH(mm)    5050x1420x1750

Weigh:        Approx 1850kg

Power Supply:        3PH 380V 50HZ

Startup Power:        33KW

Operation Powr Consumption:        Approx.8KW

Control System:        PC+PLC        

Spraying movement:        Step motor

Spray Pressure:        0.2Mpa-0.4Mpa

Flux Flow Arrange:        Option

Auto Fill Flux:        Standard        

Exhaust:        Top exhaust+Side exhaust

Exhaust Ducting Diameter(mm):        Φ250

Exhaust Fan Power:         750W      

Preheating Mode:   Convection / IR emitter

Control Mode:        PID        

Preheating Zone Number:        3

Preheating Length(mm):        1800

Preheating Temperature:        Room temperature~200℃

Warm-upTime(min):        Approx.12min (setting：150℃)

Blower Motor:        250W  3PH  220VAC

PCB Width(mm):             50~350

Convoyor Direction:        L-R (Option：R-L)

Conveyor Speed(mm/min):        500~1800

Conveyor Height(mm):        750±20

Available Component Heigh (mm):  Top 120, Bottom 15

Conveyor Speed Control Mode:  Frequency converter closed-loop stepless speed regulation

Fingers:   Spring tablet finger /D-40 duckbill finger/double hook finger/heavy double hook finger, choose one.        

Conveyor Angle:        4-7°        

Type of solder Pot:        Motor drive

Solder Pot Material:        Casting Iron

Wave Height Adjustment:       Frequency converter: computer digital control

Cooling Method:        Forced air cooling, Option: water cooler

Heater Power:  13.5KW

Solder Pot Temperature:        300℃

Solder Pot Capacity:        Approx.480kg

Wave Drive Power:     180W*2  3PH 220VAC

Solder Pot Warm-up Time:        Approx.150min (setting：250℃)

Temperature Control Mode:        PID

Finger Cleaning System:        Brush

*Note： 4 sections of preheating can be customized， and the length is 2.3m.