Máy giám sát lực căng của bu-lông Elcometer BG80DL (LEMO, Datalogging, RS232)
Hãng sản xuất: ELCOMETER Model: BG80DL - Yêu cầu báo giá
- Liên hệ
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Chế độ đo: PE & PE with Gate
Tốc độ đo bằng tay: 4 giá trị đọc mỗi giây
Dải đo: 25.4 – 2440mm
Độ chính xác: ± 1% hoặc ±0.1mm
Độ phân giải: 0.0001mm
Dải hiệu chuẩn vận tốc: 1250 - 10,000m/s; 0.0492 - 0.3937in/μs
Ghi dữ liệu: 8000 giá trị đọc
Tùy chọn hiệu chuẩn: cố định, 1 điểm, 2 điểm
Tần số đầu dò: 1 - 10MHz
Màn hình: 1/8 VGA
Đơn vị đo: mm hoặc inch
Loại pin: 3 pin AA, sử dụng trong 150 giờ
Nhiệt độ hoạt động: -10 đến 60ºC
Kích thước: 63.5 x 165 x 31.5mm
Trọng lượng (bao gồm cả pin): 383g
Kiểu kết nối đầu dò: LEMO
Giao tiếp RS232
Danh mục đóng gói: Máy chính, chất tiếp âm, hộp đựng, hướng dẫn sử dụng, chứng nhận kiểm thử, 3 pin AA, phần mềm DakView, cáp RS232/DB9 & USB/DB9
Lưu ý: máy chưa gồm đầu dò, chọn đầu dò tham khảo Datasheet Transducer
BG80 Bolt Tension Monitors
When nuts and bolts are fastened together under load the action of tightening the nut increases the force applied to the bolt causing elongation.
The BG80 range of bolt tension monitors accurately measures this elongation allowing the gauges to accurately measure time (nanoseconds), elongation, load, stress, and %strain of the bolt.
The Elcometer BG80 bolt tension monitor is available in two models: BG80DL and BG80TDL.
By using ultrasonics, bolt tension monitors are not affected by temperature, friction or resistance factors affecting the accuracy of standard torque measurement techniques - giving the BG80 range accuracy within 0.0001mm (0.00001 inch).
Using the gauge RS232 interface together with the optional shut off accessory the gauge can be programmed to automatically stop the tightening process when the appropriate load has been applied.
Features:
|
|
|
|
How does it work? As a fastener is tightened it stretches (elongates) in length. Manual torque wrenches measure the force applied when tightening a fastener, the accuracy can be affected by temperature, friction and resistance. As BG80 & BG80TDL ultrasonically measures the change in length accurately determining the applied load of a fastener as it is tightened, they are not affected by these factors. |
BG80 Bolt Tension Monitors
Technical Specification
Model & Part Number |
BG80DL & BG80TDL |
Material thickness digits display |
■ |
Measurement Mode1 |
PE & PE with Gate |
Measurement Rate: |
|
Measuring Range2 |
25.4 – 2440mm (1 – 96 inches) |
Measurement Accuracy2 |
± 1% or ±0.1mm whichever is the greater |
Measurement Resolution |
0.0001mm (0.00001 inch) |
Velocity Calibration Range |
1250 - 10,000m/s |
Additional Features: |
|
Limit alarm mode |
■ |
Data logging |
8,000 readings |
Calibration Options |
fixed, single & 2 point |
Transducer Probe Type |
single element |
Transducer Frequency Range |
1 - 10MHz |
Display |
1/8 VGA |
Units (selectable) |
mm or inches |
LED Backlight |
on / off / auto |
Repeatability / Stability Indicator |
■ |
Battery Type |
3 x AA alkaline |
Battery Life (approximate) |
150 hours |
Low Battery Indicator |
■ |
Battery Save Mode |
auto |
Operating Temperature |
-10 to 60ºC (14 to 140ºF) |
Size (w x h x d) |
63.5 x 165 x 31.5mm |
Weight (including batteries) |
383g (13.5oz) |
Aluminium case design with gasket sealed end |
■ |
Transducer Connector Type |
LEMO |
RS232 Interface |
■ |
Packing List |
Elcometer NDT BG80DL or BG80TDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, DakView software, RS232/DB9 & USB/DB9 transfer cable |
¹ PE: Pulse-Echo Mode
² Measuring range & accuracy depends on material, surface conditions and the transducer selected
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch