KOMEG TST-64A ESS 温度冲击试验箱 (-40°C~ +150°C)

Test weight: 410kg

Interior size (WxHxD): 400x400x400mm

Basket size (WxHxD): 860x2070x2000mm

Low Temp. chamber: -55ºC ~ -10ºC

Pre-cooling time: +20 ºC ~ -55 ºC, Within 60 min 

Test. chamber: -40 ºC ~ +150 ºC

High Temp. chamber: +60 °C~ +200 °C

Pre-heating time: +60 ºC ~ +200 ºC, Within 25 min

Recovery time: High-Temp Exposure 30 min

               Low-Temp Exposure 30 min

               Recovery time within 5 min

Transfer time: within 10 seconds

Safety device (standard):

No fuse breaker, over pressure, over heat and over current protection for compressor

Over temp. protect, over load protect of blower, dry heat protection

Standard accessory: Cable port(portΦ50mm)*1, shelves*2

Interior material: Stainless steel plate (SUS 304)

Exterior material: Baked painting steel or stainless steel (SUS304)

Insulation material: Rigid polyurethane Foam glass fiber wool

Refrigeration system:

Water Cooled

Semi-Hermetic compressor, cascade stage refrigeration system

CFC-Free refrigerant (HFC-507/HFC-23)

Controller:

Panel:7-inch LCD Touch panel, Chinese or English display selectable

Operation model: Program or fix point running

Memory capacity: 120programs,1200steps,

All repeat 999 cycles, part repeat 99 cycles

Accuracy: Temp.:0.1% of F.S±1 digit     

Humidity: 0.1% of F.S±1 digit

Input:Temp.:pt-100; Humidity: pt-100 or ~ 5V DCV

Ambient Temp.: +5 ºC~ +35 ºC

Power: AC 380±10 %  50Hz, 3 phase 4 wires + Ground Wires