MICROTEST 6630-10 LCR 测试仪 (10Hz- 10MHz)

Specifications

Frequency: 10Hz-10MHz

Frequency Range: 10Hz-50MHz

Frequency Setting: Continuity

Frequency Resolution: ±0.01%

Frequency Output Accuracy: 100mHz, 6-bit Frequency Input

Basic Accuracy: typical ±0.05%

AC Drive Level: 

+ Test Signal Voltage Level: 10mV - 2Vrms(100Ω);   10mV - 1Vrms(25Ω)

+ Voltage Minimum Resolution: 1mV

+ Accuracy: ALC ON：6％ * Voltage ±2mV;   ALC OFF：10％ * Voltage ±2mV

+ Test Signal Current Level: 200µA - 20mArms

+ Current Minimum Resolution: 10µA

+ Accuracy:  ALC ON：6％ * Current ± 20µA; ALC OFF：10％ * Current ± 20µA

DC Drive Level: 1V (fixed)

Output Impedance: 25Ω/100Ω (switchable)

Measurement Mode: Meter mode, list mode

Measurement Parameters: |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、ε and μr

Test Time (Fastest): < 3mS 

Measurement Parameters

|Z| 0.000 mΩ to 9999.99 MΩ

R, X ± 0.000 mΩ to 9999.99 MΩ

|Y| 0.00000 μS to 999.999 kS

G, B ± 0.00000 μS to 999.999 kS

θRAD ± 0.00000 to 3.14159

θDEG ± 0.000° to 180.000°

Cs, Cp ± 0.00000 pF to 9999.99 F

Ls, Lp ± 0.00 nH to 9999.99 kH

D 0.00000 to 9999.99

Q 0.00 to 9999.99

Δ ± 0.00% to 9999.99%

Rdc 0.00 mΩ to 99.9999 MΩ

εr' εr'' 0 to 100000

μr' μr'' 0 to 100000

System: 

Measurement Circuit: Series/Parallel

Correction: Open Circuit/Short Circuit/Load correction

Cable Compensation: 0 / 0.5 / 1 /2 (m)

BIN: ABS、ΔABS、Δ%、OFF

Comparator: 9

List Mode: 50 groups of Multi-steps setting (Each group contains up to 15 steps)

Bulit-in Storge: 100 sets LCR setting documents, 50 groups of list mode setting

USB Host Storge: LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data

Trigger Test: Auto, manual, RS-232, GPIB, Handler

Power Supply: Voltage：90-264Vac; Frequency：47-63Hz

Power consumption: 30VA

Environment: Temperature：10℃-40℃; Humidity：20-90%RH

Dimension: 336x147x340 mm (W*H*D)

Weight: 3 Kg

Interface: RS-232、Handler、LAN、USB Host、USB Device

Display: Color Screen, 7" TFT (800*480)