TEKTRONIX AWG5014C 高性能任意波形发生器

制造商: TEKTRONIX
Model: AWG5014C
联系
- 报价要求
价格合理详情请致电

热线:   (+84) 966520220
电话：  +84 (24) 62923267

技术规格
制造商消息

Channels: 4
Output Frequency: 480 MHz
Analog Bandwidth: Up to 300 MHz
Sample rate: 10 MS/s to 1.2 GS/s
Resolution: 14 bit
Sin (x)/x (–1 dB): 300 MHz
Sin (x)/x (–3 dB): 520 MHz
Display Characteristics: LED backlit monitor with touch screen, 10.4 in. (264 mm) 1024 × 768 (V) XGA
Power Supply: 100 to 240 V AC, 47 to 63 Hz
Consumption: 450 Watts
Dimension: 245 x 465 x 500 mm
Weight: 19.5 kg
Include: Accessory pouch, front cover, USB mouse, compact USB keyboard, lead set for DC output, AWG5000C Series product software CD and instructions, documentation CD with browser, Quick Start User Manual and registration card, Certificate of Calibration, and power cable.

Details

Datasheet
Option:
SMA Cable 40 in. (102 cm): 012-1690-xx
SMB Cable 20 in. (51 cm): 012-1503-xx
Rackmount Kit Rackmount Kit with Instruction: 016-1983-xx
Front Removable HDD Bay Front Removable HDD Bay: 016-1979-xx

Characteristics

Definitions

Specifications (not noted) – Product characteristics described in terms of specified performance with tolerance limits which are warranted/guaranteed to the customer. Specifications are checked in the manufacturing process and in the Performance Verification section of the product manual with a direct measurement of the parameter.

Typical (noted) – Product characteristics described in terms of typical performance, but not guaranteed performance. The values given are never warranted, but most units will perform to the level indicated. Typical characteristics are not tested in the manufacturing process or the Performance Verification section of the product manual.

Nominal (noted) – Product characteristics described in terms of being guaranteed by design. Nominal characteristics are non-warranted, so they are not checked in the manufacturing process or the Performance Verification section of the product manual.

AWG5000C Series Specifications

General Characteristics

Characteristic	AWG5014C	AWG5002C
Digital to Analog Converter
Sample rate	10 MS/s to 1.2 GS/s	10 MS/s to 600 MS/s
Resolution	14 bit
Sin (x)/x Roll-off
Sin (x)/x (–1 dB)	300 MHz	150 MHz
Sin (x)/x (–3 dB)	520 MHz	260 MHz

Frequency Domain Characteristics

Characteristic	AWG5014C	AWG5002C
Output Frequency Characteristics
Effective Frequency Output	Fmaximum (specified) is determined as "sample rate / oversampling rate" or "SR/2.5"
Fmaximum	480 MHz	240 MHz
Fmaximum (typical)	540 MHz	275 MHz
Effective Frequency Switching Time	Minimum frequency switching time from selected frequencies F₁ to F₂ is determined as "1/Fmaximum"
Standard
Ts	2.1 ns	4.2 ns
Ts (typical)	1.8 ns	3.7 ns
Modulation Bandwidth	Modulation bandwidth is a combination of sin(x)/x and rise time bandwidths, defined as the lower of the sin(x)/x bandwidth or the calculated percentage of rise time bandwidth (as shown)
Mod bandwidth (–1 dB) (typical) –1 dB BW = 0.932 × (–1 dB TrBW)	Normal: Up to 130 MHz Direct: Up to 180 MHz	Normal: Up to 100 MHz Direct: Up to 130 MHz
Mod bandwidth (–3 dB) (typical) –3 dB BW = 0.913 × (–3 dB TrBW)	Normal: Up to 230 MHz Direct: Up to 300 MHz	Normal: Up to 180 MHz Direct: Up to 230 MHz
Output Amplitude Characteristics
Amplitude	Amplitude levels are measured as single-ended outputs. Amplitude level will be 3 dBm higher when using differential (both) outputs
Range	Normal: –30 dBm to 17 dBm Direct: –30 dBm to 0 dBm
Resolution	0.01 dB
Accuracy	At 0 dBm level, with no offset, ±0.3 dB
Output Flatness	Mathematically corrected for characteristic Sin (x)/x roll-off, uncorrected by external calibration methods
Flatness (typical)	±1.0 dB, from 10 MHz to 480 MHz
Digital Data Out (Option 03)
Number of outputs	14-bit output on Ch1 and Ch2 (28 total)
Output connector	SMB (rear panel), single ended
Output impedance	50 Ω
Digital Data Out Levels (into 50 Ω)
Window	–1.0 V to 2.7 V
Amplitude	0.1 V_p-p to 3.7 V_p-p
Resolution	10 mV
Accuracy	±(10% of setting + 120 mV)
Current (max)	±54 mA per channel
Rise/Fall time (20% to 80%)	300 ps (1.0 V_p-p, Hi: 1.0 V, Lo: 0 V)
Delay from marker	–41 ns to –82 ns
Skew between outputs	<400 ps="" p="">

Time Domain Characteristics

Characteristic	AWG5014C	AWG5002C
Data Rate Characteristics
Data Rate	Bit rate is determined as "sample rate / 4 points per cycle", allowing full impairment generation
Bit rate (typical)	300 Mb/s	150 Mb/s
Rise/Fall Time Characteristics
Rise/Fall Time	Rise/Fall time measured at 10% to 90% levels
Tr/Tf	Normal: 1.4 ns Direct: 0.95 ns
Rise Time Bandwidth	Rise-time bandwidth converted from rise-time (0.34/Tr, assumed Gaussian transition) characteristics through analog output circuitry and cabling
Tr bandwidth (–1 dB) (typical)	Normal: 140 MHz Direct: 210 MHz
Tr bandwidth (–3 dB) (typical)	Normal: 250 MHz Direct: 370 MHz
Low-pass filter	Normal: Bessel Type, 50 and 100 MHz
Output Amplitude Characteristics
Amplitude	Amplitude levels are measured between differential outputs (+) and (–) For single-ended output (+) the amplitude level will be one-half the levels below
Range	Normal: 40 mV_p-p to 9.0 V_p-p Direct: 40 mV_p-p to 1.2 V_p-p
Resolution	1.0 mV
Accuracy	At 0.5 V, with no offset, ±(2% of amplitude ±2 mV)
Offset
Range	Normal: ±2.25 V
Resolution	1.0 mV
Accuracy	At minimum amplitude, ±(2.0% of offset ±10 mV)

Common Characteristics

Characteristic	AWG5014C	AWG5002C
Output Distortion Characteristics
Spurious Free Dynamic Range (SFDR)	SFDR is determined as a function of the directly generated carrier frequency. Harmonics not included
SFDR (Direct) (typical)	Clock: 1.2 GS/s, 14-bit operation Frequency: 10 MHz to 480 MHz Level: 4 dBm (1 V_p-p) Offset: None	Clock: 0.6 GS/s, 14-bit operation Frequency: 10 MHz to 240 MHz Level: 4 dBm (1 V_p-p) Offset: None
DC to 10 MHz carrier	–70 dBc	–74 dBc
10 to 20 MHz carrier	–70 dBc	–70 dBc
20 to 40 MHz carrier	–62 dBc	–62 dBc
40 to 80 MHz carrier	–62 dBc	–57 dBc
80 to 150 MHz carrier	–58 dBc	–54 dBc
150 to 300 MHz carrier	–58 dBc	–54 dBc
300 to 480 MHz carrier	–56 dBc
Spurious Free Dynamic Range (SFDR)	When viewed as a modulation bandwidth and used with external frequency up-conversion, the specifications will hold and be independent of carrier frequency with proper conversion circuitry design. Harmonics not included
SFDR (Direct) (typical)	Clock: 1.2 GS/s, 14-bit operation Modulation Bandwidth: Up to 180 MHz Level: 4 dBm (1 V_p-p) Offset: None	Clock: 0.6 GS/s, 14-bit operation Modulation Bandwidth: Up to 130 MHz Level: 4 dBm (1 V_p-p) Offset: None
DC to 10 MHz bandwidth	–70 dBc	–74 dBc
DC to 20 MHz bandwidth	–70 dBc	–70 dBc
DC to 40 MHz bandwidth	–62 dBc	–62 dBc
DC to 80 MHz bandwidth	–62 dBc	–57 dBc
DC to 150 MHz bandwidth	–58 dBc	–54 dBc
DC to 180 MHz bandwidth	–58 dBc

Characteristic	AWG5014C	AWG5002C
Harmonic Distortion	Clock: 1.2 GS/s, 14-bit operation 32-point waveform 37.5 MHz output Normal: 10 dBm (2.0 V_p-p) Direct: 0 dBm (0.6 V_p-p) Offset: None	Clock: 0.6 GS/s, 14-bit operation 32-point waveform 18.7 MHz output Normal: 10 dBm (2.0 V_p-p) Direct: 0 dBm (0.6 V_p-p) Offset: None
Harmonics	Normal: <40 dbc="" p=""> Direct: <49 dbc="" p="">	Normal: <46 dbc="" p=""> Direct: <55 dbc="" p="">
Nonharmonic Distortion	Clock: 1.2 GS/s, 14-bit operation Frequency: 10 MHz to 480 MHz Level: 4 dBm (1 V_p-p) Offset: None	Clock: 0.6 GS/s, 14-bit operation Frequency: 10 MHz to 240 MHz Level: 4 dBm (1 V_p-p) Offset: None
Spurious	< –60 dBc
Phase Noise	Clock: 1.2 GS/s, 14-bit operation 32-point waveform 37.5 MHz output Amplitude: 10 dBm (2 V_p-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset	Clock: 0.6 GS/s, 14-bit operation 32-point waveform 18.7 MHz output Amplitude: 10 dBm (2 V_p-p) at 0 offset, < –85 dBc/Hz at 10 kHz offset
Jitter
Random jitter (typical)	1010 clock pattern
RMS value	Normal: 5.0 ps
Total jitter (typical)	2¹⁵ – 1 data pattern (at 10^–12 BER)
Peak-Peak value	Normal: 150 ps at 0.5 Gb/s

AWG5014C/5012C phase noise (typical).

AWG5002C phase noise (typical).

AWG5000C Series Common Features

Common Hardware Characteristics

Characteristic	AWG5014C	AWG5012C
Number of Outputs	4 channels	2 channels
Output connector	Differential, BNC (front panel)
Output impedance	50 Ω
Waveform Length	Standard – to 16M points Extended memory – to 32M points
Number of Waveforms	1 to 16,200
Sequence Length/Counter	1 to 8,000 steps 1 to 65,536 count
Run Modes
Continuous	Waveform is iteratively output. If a sequence is defined, the sequence order and repeat functions are applied
Triggered	Waveform is output only once when an internal, external, programmatic (GPIB, LAN), or manual trigger is received
Gated	Waveform begins output when gate is "True" and resets when gate is "False"
Sequence	Waveform is output as defined by the sequence selected
Jump	Synchronous and asynchronous
Sampling Clock
Resolution	8 digits
Accuracy	Within ±(1 ppm + Aging) Aging: Within ±1 ppm per year
Internal Trigger Generator
Range	1.0 µs to 10.0 s
Resolution	3 digits, 0.1 µs minimum
Output Skew Control
Range	–5 ns to 5 ns
Resolution	5 ps

Common Software Characteristics

Characteristic	AWG5014C	AWG5012C	AWG5002C
Operating System / Peripherals / IO	Windows 7 4 GB memory CD/DVD drive (front panel) 300 GB Solid State Drive (std) / 1 TB Mechanical Hard Disk Drive (opt) (rear-panel removable, optional front mount kit) USB compact keyboard and mouse USB 2.0 compliant ports (6 total – 2 front, 4 rear) PS/2 mouse and keyboard connections (rear panel) RJ-45 Ethernet connector (rear panel) supports 10/100/1000BASE-T eSATA (rear panel) DVI/I Video (rear panel)
Display Characteristics	LED backlit monitor with touch screen, 10.4 in. (264 mm) 1024 × 768 (V) XGA
Waveform File Import Capability	Import waveform format by series: .AWG file created by Tektronix AWG5000 or AWG7000 Series .PAT, .SEQ, .WFM, and .EQU file formats created by Tektronix arbitrary waveform generators such as the AWG400/500/600/700 Series .TIQ and .IQT files created by Tektronix real-time spectrum analyzers .TFW file created by Tektronix AFG3000 Series arbitrary/function generators .DTG file created by Tektronix DTG5000 Series data timing generators .WFM or .ISF file created by Tektronix TDS/DPO Series oscilloscopes text file (.TXT)
Waveform File Export Capability	Export waveform format by series: Tektronix AWG400/500/600/700 (.wfm or .pat) and text format
Software Driver for Third-party Applications	IVI-COM driver, MATLAB library
Instrument Control / Data Transfer
GPIB	Remote control and data transfer (conforms to IEEE-Std 488.1, compatible with IEEE-Std 488.2 and SCPI-1999.0)
Ethernet	Remote control and data transfer (conforms to IEEE-Std 802.3)
TekLink	Remote control and data transfer (proprietary bus for Tektronix product high-speed interconnection and communication)
LAN eXtensions for Instrumentation (LXI)	Class LXI Class C Version 1.3

Auxiliary Outputs

Characteristic	AWG5014C	AWG5012C
Markers
Number	Total: 8 (2 per channel)	Total: 4 (2 per channel)
Style	Single ended
Connector	BNC (front panel)
Impedance	50 Ω
Level (into 50 Ω)	Amplitude levels are measured between differential outputs (+) to (–) Single-ended output amplitude level will be one-half the voltage levels below
Window	–2.0 V to 5.4 V
Amplitude	0.2 V_p-p to 7.4 V_p-p
Resolution	10 mV
Accuracy	±(10% of setting + 120 mV)
Rise/Fall time (20% to 80%)	300 ps (1.0 V_p-p, Hi: 1.0 V, Lo: 0.0 V)
Timing skew
Range	0 to 1000 ps
Resolution	50 ps
Delay control
Range	0 to 300 ps
Resolution	1 ps
Accuracy	±(5% of setting + 50 ps)
Jitter
Random RMS (typical)	5 ps
Total p-p (typical)	80 ps (2¹⁵ – 1 PN pattern at 10^–12 BER)
10 MHz Reference Out
Amplitude	1.2 V_p-p into 50 Ω, maximum 2.5 V open
Connector	BNC (rear panel)
Impedance	50 Ω, AC coupled
Clock Out (VCO)
Range	600 MHz, 1.2 GHz
Amplitude	0.4 V_p-p into 50 Ω to ground
Connector	BNC (rear panel)
Impedance	50 Ω, AC coupled
DC Outputs
Number	4, independently controlled
Range	–3.0 V to 5.0 V
Resolution	10 mV
Accuracy	±(3% of setting + 120 mV)
Connector	2×4 pin header (front panel)
Current (max)	±100 mA

Auxiliary Inputs

Characteristic	AWG5014C	AWG5012C	AWG5002C
Trigger / Gate In
Polarity	Pos or Neg
Range	50 Ω: ±5 V 1 kΩ: ±10 V
Jitter (typical)	2.0 ns to 4.5 ns
Connector	BNC (front panel)
Impedance	50 Ω, 1 kΩ
Threshold
Level	–5.0 V to 5.0 V
Resolution	0.1 V
Trigger to output uncertainty
Asynchronous (typical)	Between internal/external clock and trigger timing: 2.0 ns to 4.5 ns
Trigger mode
Minimum pulse width	20 ns
Trigger hold-off	160 × sampling period – 200 ns
Delay to output	48 × sampling period + 500 ns
Gated mode
Minimum pulse width	1024 × sampling period + 10 ns
Delay to output	240 × sampling period + 500 ns
Event In
Polarity	Pos or Neg
Range	50 Ω: ±5 V 1 kΩ: ±10 V
Connector	BNC (front panel)
Impedance	50 Ω, 1 kΩ
Threshold
Level	–5.0 V to 5.0 V
Resolution	0.1 V
Sequence mode
Minimum pulse width	20 ns
Event hold-off	200 × sampling period + 500 ns
Delay to output	260 × sampling period + 300 ns (Jump timing: asynchronous jump)
External Clock In
Input voltage range	0.2 V_p-p to 0.8 V_p-p, –10 dBm to 2 dBm
Frequency range	600 MHz to 1.2 GHz (acceptable frequency drift of ±5%)
Clock divider	1/1, 1/2, 1/4...1/256
Connector	BNC (rear panel)
Impedance	50 Ω, AC coupled
Fixed Reference Clock In
Input voltage range	0.2 V_p-p to 3.0 V_p-p, –10 dBm to 14 dBm
Frequency range	10 MHz, 20 MHz, 100 MHz (within ±0.1%)
Connector	BNC (rear panel)
Impedance	50 Ω, AC coupled
Phase Lock In
Input voltage range	0.2 V_p-p to 3.0 V_p-p, –10 dBm to 14 dBm
Frequency range	5 MHz to 600 MHz (acceptable frequency drift is ±0.1%)
Multiplier rate	1 to 240
Connector	BNC (rear panel)
Impedance	50 Ω, AC coupled
Add In
Input voltage range	±1.0 V
DC gain	1
Bandwidth	DC to 100 MHz (–3 dB)
Connector	BNC (rear panel)
Impedance	50 Ω, AC coupled

Physical Characteristics

Dimension	mm	in.
Height	245	9.6
Width	465	18
Depth	500	19.7
Weight	kg	lb.
Net (instrument)	19.5	43
Net (with packaging)	28.5	62.8
Mechanical Cooling
Clearance	cm	in.
Top/Bottom	2	0.8
Side	15	6
Rear	7.5	3
Power Supply
Rating	100 to 240 V AC, 47 to 63 Hz
Consumption	450 Watts

Environmental Characteristics

Characteristic	Description
Temperature
Operational	10 to 40 °C
Nonoperational	20 to 60 °C
Humidity
Operational	5% to 80% relative humidity (% RH) at up to 30 °C, 5% to 45% relative humidity above 30 °C up to 50 °C
Nonoperational	5% to 90% relative humidity (% RH) at up to 30 °C, 5% to 45% relative humidity above 30 °C up to 50 °C
Altitude
Operational	Up to 10,000 ft. (3,048 m)
Nonoperational	Up to 40,000 ft. (12,192 m)
Vibration
Sine
Operational	0.33 mm p-p (0.013 in p-p) constant displacement, 5 to 55 Hz
Nonoperational	N/A
Random
Operational	0.27 g RMS, 5 to 500 Hz, 10 minutes per axis
Nonoperational	2.28 g RMS, 5 to 500 Hz, 10 minutes per axis
Mechanical Shock
Operational	Half-sine mechanical shocks, 30 g peak, 11 ms duration, 3 drops in each direction of each axis
Nonoperational	Half-sine mechanical shocks, 10 g peak, 11 ms duration, 3 drops in each direction of each axis
Regulatory
Safety	UL61010-1, CAN/CSA-22.2, No.61010-1-04, EN61010-1, IEC61010-1
Emissions	EN55011 (Class A), IEC61000-3-2, IEC61000-3-3
Immunity	IEC61326, IEC61000-4-2/3/4/5/6/8/11
Regional certifications