TEKTRONIX TSG4106A 射频矢量信号发生器

制造商: TEKTRONIX
Model: TSG4106A
联系
- 报价要求
价格合理详情请致电

热线:   (+84) 966520220
电话：  +84 (24) 62923267

技术规格
制造商消息

Manucturer: Tektronix

Model: TSG4106A (M01)

Details

Option

Options M00 or M01 must be specified at the time of instrument order.

M00 Instrument with oven-controlled crystal oscillator (OCXO)
M01 Instrument with voltage-controlled crystal oscillator (VCXO)
GPIB Adds GPIB interface

TSG4100A-RM1 Single rack mount kit (can be ordered separately)
TSG4100A-RM2 Dual rack mount kit (can be ordered separately)
TSG4100A-ATT 30 dB, 5 W RF attenuator up to 6 GHz
D1 A list of performance verification test results

Software options

To upgrade to vector/digital modulation capability and/or add more modulation options after initial purchase, order "TSG4100A-UP + VM xx” instead of “TSG410xA VMxx”.

VM00 Basic vector modulation package with internal 6 MHz modulation bandwidth
VM01 GSM modulation (requires Option VM00)
VM02 GSM EDGE modulation (requires Option VM00)
VM03 W-CDMA modulation (requires Option VM00)
VM04 APCO-25 modulation (requires Option VM00)
VM05 DECT modulation (requires Option VM00)
VM06 NADC modulation (requires Option VM00)
VM07 PDC modulation (requires Option VM00)
VM08 TETRA modulation (requires Option VM00)
VM10 Audio Clip (analog AM and FM)
EIQ External 200 MHz modulation bandwidth (requires Option VM00)
.................................................................................................................................................................

Specifications

All specifications apply to all models unless noted otherwise.

Frequency

BNC output, all models

DC to 62.5 MHz

N-type outputs

TSG4102A: 950 kHz to 2.0 GHz
TSG4104A: 950 kHz to 4.0 GHz
TSG4106A: 950 kHz to 6.0 GHz

Frequency resolution: 1 μHz at any frequency

Switching speed: <8 ms="" to="" within="" 1="" ppm="" dd="">

Frequency error: <(10^–18 + time-base error) × fc

Frequency stability: 1 × 10^–11 (1 s Allan variance)

Front panel BNC output

Frequency range: DC to 62.5 MHz

Amplitude: 1.00 V_RMS to 0.001 V_RMS (-47 dBm to +14.96 dBm)

Offset: ±1.5 VDC

Offset resolution: 5 mV

Maximum excursion: 1.817 V (amplitude + offset)

Amplitude resolution: <1 dd="">

Amplitude accuracy: ±0.7 dB

Harmonics, typical: <–40 dBc

Spurious, typical: <–65 dBc

Output coupling: DC, 50 Ω ±2%

Impedance: 50 Ω

Reverse protection: ±5 VDC

VSWR, typical: < 1.6 :1

Front panel N-type output

Power output

TSG4102A: +16.5 dBm to –110 dBm
TSG4104A: +16.5 dBm to –110 dBm (<3 ghz="" dd="">
TSG4106A: +16.5 dBm to –110 dBm (<4 ghz="" p="">+10 dBm to –110 dBm (4-6 GHz)

Voltage output

TSG4102A: 1.5 V_RMS to 0.7V_RMS
TSG4104A: 1.5 V_RMS to 0.7 μV_RMS (<3 ghz="" dd="">
TSG4106A: 1.5 V_RMS to 0.7 μV_RMS (<4 ghz="" dd="">

Amplitude resolution: 0.01 dBm

Amplitude accuracy

CW, 50 Ω load (dB, typical)

CW, 18 °C to 28 °C	>10 dBm	10 to -30 dBm	-30 to -60 dBm	-60 to -100 dBm	<-100 dbm="" th="">
10 MHz to 0.1 GHz	±0.2	±0.25	±0.35	±0.45	±0.6
0.1 GHz to 2 GHz	±0.15	±0.15	±0.25	±0.35	±0.6
2 GHz to 4 GHz	±0.3	±0.2	±0.35	±0.6	±0.8
4 GHz to 6 GHz	NA	±0.3	±0.4	±0.75	±1.25

CW, 50 Ω load (dB, max)

Level range:	+5 to -30 dBm (max)		+5 to -30 dBm (typical)
Temperature:	18 °C to 28 °C	5 °C to 40 °C	5 °C to 40 °C
10 MHz to 0.1 GHz	±0.6	±1.0	±0.7
0.1 GHz to 2 GHz	±0.6	±1.0	±0.6
2 GHz to 4 GHz	±0.6	±1.0	±0.7
4 GHz to 6 GHz	±1	±1.5	±0.9

Impedance: 50 Ω

Output coupling: AC, 50 Ω

VSWR, typical: <1.5 2="" mhz="" to="" 2="" ghz="" p=""><1.8 2="" ghz="" to="" 6="" ghz="" p="">

Reverse protection: 30 VDC, +25 dBm

IQ modulation output level accuracy

Output amplitude is -5 dBm.

Temperature:	18 °C to 28 °C		5 °C to 40 °C
Fc:	Typical (dB)	Max (dB)	Typical (dB)
<2 ghz="" td="">	±0.1	±0.4	±0.4
2 GHz to 4 GHz	±0.2	±0.6	±0.4
4 GHz to 6 GHz	±0.4	±0.8	±0.7

Spectral purity of the RF output

Subharmonics: None

Harmonics, maximum: Output level <0 dbm="" 1="" ghz="" cw="" signal="" dl="">
TSG4102A and TSG4104A: < -38 dBc
TSG4106A: < -30 dBc

Harmonics, typical (output level < 0 dBm): < -35 dBc, CW , Fc < 2 GHz

Spurious (typical)

Output level -10 dBm, CW

< -68 dBc: >10 kHz from carrier in 950 kHz to 1 GHz
< -60 dBc: >10 kHz from carrier in 1 GHz to 2 GHz
< -55 dBc: >10 kHz from carrier in 2 GHz to 4 GHz
< -55 dBc: >10 kHz from carrier in 4 GHz to 6 GHz

Residual FM, typical: 1 Hz rms (300 Hz to 3 kHz bandwidth)

Residual AM, typical: 0.006 % rms (300 Hz to 3 kHz bandwidth)

SSB phase noise

Output level is +5 dBm at 18 °C to 28 °C.

Carrier	Offset from carrier, typical (dBc/Hz)
Carrier	1 kHz	10 kHz	20 kHz	1 MHz
1 GHz	-102	-110	-113	-124
2 GHz	-96	-104	-107	-118
3 GHz	-93	-102	-105	-120
6 GHz	-87	-96	-99	-114

SSB phase noise at 1 GHz carrier, maximum (output level +5 dBm, 5 ℃ to 40 ℃)

1 kHz offset: –95 dBc/Hz
10 kHz offset: –106 dBc/Hz
20 kHz offset: –107 dBc/Hz
1 MHz offset: –120 dBc/Hz
2 GHz offset: –118 dBc/Hz
>3 GHz offset: –120 dBc/Hz

Phase setting (front panel outputs)

Maximum phase step: ±360º

Phase resolution

0.01º (DC to 100 MHz)

0.1º (100 MHz to 1 GHz)

1.0º (1 GHz to 6 GHz)

OCXO time-base (Option M00 or Option E1)

Oscillator type: Oven-controlled, 3rd OT, SC-cut crystal

Initial accuracy at calibration (20 minute warm-up, at 18 ºC to 28 ºC): <±0.02 ppm

Temperature drift (0 ºC to 40 ºC): <±0.003 ppm

Aging: <±0.05 ppm/year

VCXO time base (Option M01)

Initial accuracy at calibration (20 minute warm-up, at 18 ºC to 28 ºC): <±0.5 ppm

Temperature drift (0 ºC to 40 ºC): <±5.0 ppm

Aging: <±3.0 ppm/year

Time-base input

Frequency: 10 MHz, ±2 ppm

Amplitude: 0.5 V_P-P to 4 V_P-P (–2 dBm to +16 dBm)

Input impedance: 50 Ω, AC coupled

Time-base output

Frequency: 10 MHz, sine

Source: 50 Ω, DC transformer coupled

Amplitude: >7.5 dBm

Internal modulation source

Waveforms: Sine, ramp, saw, square, pulse, noise

Sine THD: –74 dBc (typical at 20 kHz)

Ramp linearity: <0.05 1="" khz="" dd="">

Rate

TSG4102A and TSG4104A: 1 μHz to 500 kHz: < 62.5 MHz CF
1 μHz to 50 kHz: ≥62.5 MHz
TSG4106A: 1 μHz to 500 kHz: < 93.75 MHz CF
1 μHz to 50 kHz: ≥93.75 MHz

Rate resolution: 1 μHz

Rate error: 1:2³¹ + time-base error

Noise function: White Gaussian noise (rms = dev / 5)

Noise bandwidth: 1 μHz < ENBW < 50 kHz

Pulse generator period: 1 μs to 10 s

Pulse generator width: 100 ns to 9999.9999 ms

Pulse timing resolution: 5 ns

Pulse noise function: Length 2^N-1 PRBS 5 ≤ N ≤ 32, bit period 100 nS to 10 S

Analog modulation output

Connector type: BNC (rear panel)

Impedance: 50 Ω

Function: AM, FM, ΦM, Pulse

Scale factor: ±1 V for ± full deviation

Pulse/Blank: Low = 0 V
Hi = 3.3 V

External analog modulation input

Connector type: BNC (rear panel)

Impedance: 100 kΩ

Function: AM, FM, ΦM, Pulse

Scale factor: ±1 V for ± full deviation

Pulse/Blank: Low = 0 V
Hi = 3.3 V

Input coupling: DC or 4 Hz High-pass

Pulse Threshold: +1 VDC

Input Offset: < 500 μV

Amplitude modulation

Range: 0 to 100% (decreases above +7 dBm)

Resolution: 0.1%

Modulation source: Internal or external

Modulation distortion, typical

BNC output: <1 fc="" 62="" 5="" mhz="" fm="1" khz="" dd="">
N-type output: <3 fc=""> 62.5 MHz, fm = 1 kHz)

Modulation bandwidth (external): >100 kHz

Frequency modulation

Minimum frequency deviation: 0.01 Hz

Maximum frequency deviation

TSG4102A and TSG4104A

Smaller of fc and 64 MHz – fc. In 0 to 62.5 MHz

Frequency range	Maximum deviation
62.5 MHz < fc ≤ 126.5625 MHz	1 MHz
126.5625 MHz < fc ≤253.1250 MHz	2 MHz
253.1250 MHz < fc ≤ 506.25 MHz	4 MHz
506.25 MHz < fc ≤ 1.0125 GHz	8 MHz
1.0125 GHz < fc ≤ 2.0 GHz	16 MHz
2.025 GHz < fc ≤ 4.0 GHz (TSG4104A)	32 MHz

TSG4106A

Smaller of fc and 96 MHz – fc. In 0 to 93.75 MHz

Frequency range	Maximum deviation
93.75 MHz < fc ≤ 189.84375 MHz	1 MHz
189.84375 MHz < fc ≤ 379.6875 MHz	2 MHz
379.6875 MHz< fc ≤ 759.375 MHz	4 MHz
759.375 MHz < fc ≤ 1.51875 GHz	8 MHz
1.51875 GHz < fc ≤ 3.0375 GHz	16 MHz
3.0375 GHz < fc ≤ 6.0 GHz	32 MHz

Deviation resolution: 0.1 Hz

Deviation accuracy, typical

TSG4102A and TSG4104A: < 0.1% of selected deviation + 5 Hz (fc < 62.5 MHz)
< 2% of selected deviation + 20 Hz (fc > 62.5 MHz)
TSG4106A: < 0.1% of selected deviation + 5 Hz (fc < 93.75 MHz)
< 2% of selected deviation + 20 Hz (fc > 93.75 MHz)

Modulation source: Internal or external

Modulation distortion, typical: < -60 dB (fc=100 MHz, fm=1 KHz, fd= 3 KHz)

External FM carrier offset, typical: < ±0.001 X FM deviation

Modulation bandwidth, typical

TSG4102A and TSG4104A: 500 kHz (fc < 62.5 MHz)
100 kHz (fc > 62.5 MHz)
TSG4106A: 500 kHz (fc < 93.75 MHz)
100 kHz (fc > 93.75 MHz)

Phase modulation

Deviation: 0º to 360º

Deviation resolution, typical

0.01º (DC to 100 MHz)

0.1º (100 MHz to 1 GHz)

1º (1 GHz and above)

Deviation accuracy, typical

TSG4102A and TSG4104A

2% (fc < 62.5 MHz)

3% (fc > 62.5 MHz)

TSG4106A

2% (fc < 93.75 MHz)

3% (fc > 93.75 MHz)

Modulation source: Internal or external

Modulation distortion, typical: < -60 dB (fc = 100 MHz, fm =1 kHz, ΦD = 50º)

Modulation bandwidth, typical

TSG4102A and TSG4104A: 500 kHz (fc < 62.5 MHz)
100 kHz (fc > 62.5 MHz)
TSG4106A: 500 kHz (fc < 93.75 MHz)
100 kHz (fc > 93.75 MHz)

Pulse modulation

Pulse mode: Logic High turns RF output ON

On-Off ratio, typical

BNC output

> 70 dB

Type-N output

> 57 dB (fc < 1.0 GHz)

> 40 dB (1.0 GHz ≤ fc < 4.0 GHz)

> 35 dB (4.0 GHz ≤ fc < 6.0 GHz)

Pulse feed-through, typical: 10% of carrier for 20 ns at turn on

Turn On-Off delay: 60 ns

RF Rise-Fall time, typical: 20 ns

Modulation source: Internal or external pulse

Interface connectors

USB: USB 2.0, host

Ethernet (LAN): 10/100 Base-T.TCP/IP and DHCP default

GPIB: IEEE488.2

RS-232: 4800 to 115,200 baud, RTS/CTS flow

External I/Q modulation (Option EIQ)

Carrier frequency range

400 MHz to 2.0 GHz (TSG4102A)

400 MHz to 4.0 GHz (TSG4104A)

400 MHz to 6.0 GHz (TSG4106A)

I/Q inputs (rear panel): 50 Ω, ±0.5 V

I/Q full scale input: (I² + Q²)^1/2 = 0.5 V

Modulation bandwidth: max 400 MHz RF bandwidth

I or Q input offset: <500 v="" dd="">

Carrier suppression

> -45 dBc for fc ≤ 3 GHz

> -40 dBc for 3 GHz < fc ≤ 5 GHz

> -35 dBc for fc > 5 GHz

I and Q baseband modulation bandwidth (3 dB from fc): > 200 MHz (fc < 2.5 GHz, RF BW >400 MHz)
> 150 MHz (fc > 2.5 GHz, RF BW >300 MHz)

Dual baseband generator (Option VM00)

Channels: 2 (I and Q)

DAC data format: Dual 14-bit at 125 MS/s

Reconstruction filter: 10 MHz, 3rd order Bessel LPF

Arbitrary symbol memory: Up to 16 Mbits

Symbol rate: 1 Hz to 6 MHz (1 μHz resolution)

Symbol length: 1 to 9 bits (maps to constellation)

Symbol mapping: Default or user-defined constellation

Symbol source (User-defined symbols, built-in PRBS generator, or settable pattern generator)

PRBS length: 2n – 1 (5 < n < 32; 31 to about 4.3 × 10⁹ symbols)
Pattern generator: 16 bits

Digital filtering

Filter type: Raised Cosine, Root Raised Cosine, Gaussian, Rectangular, Linear, Sinc, linearized Gaussian, C4FM, customized FIR
Filter length: 24 symbols

Noise impairments

Additive noise: White, Gaussian
Level: –70 dBc to –10 dBc

Basic vector modulation formats (Option VM00)

Formats by bit

Constellation	1-bit	2-bit	3-bit	4-bit	5-bit	6-bit	8-bit
ASK	2ASK	4ASK	8ASK	16ASK
FSK	BFSK	4FSK	8FSK	16FSK
PSK	BPSK	QPSK	8PSK	16PSK
QAM	n/a	4QAM	n/a	16QAM	32QAM	64QAM	256QAM
CPM	BCPM	4CPM	8CPM	16CPM
VSB	n/a	n/a	8VSB	16VSB

Others: OQPSK, DQPSK, π/4DQPSK, 3π/8 8 PSK

Digital modulation applications (typical)

Digital modulation applications options

Option	Application
VM01	GSM
VM02	GSM-EDGE
VM03	W-CDMA
VM04	APCO-25 Phase 1
VM05	DECT
VM06	NADC
VM07	PDC
VM08	TETRA
VM10	Audio clip (analog AM and FM)

Option VM01 GSM, (GMSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.6%

Option VM02 GSM-EDGE, (3π/8 8PSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.30%

Option VM03 W-CDMA, (QPSK,3.840Mcps, 2.1425GHz, 0dBm), RMS EVM: 1.7%

Option VM03 W-CDMA (QPSK,3.840Mcps, 1.85 GHz, 0dBm), RMS EVM: 1.7%

Option VM04 APCO-25, (4FSK-C4FM, 4.8 kS/s,850 MHz, 0 dBm), Freq Err: 0.5%

Option VM05 DECT, (2FSK 1.152 Mbps,1.925 GHz, 0 dBm), RMS FSK Err: 1.5%

Option VM06 NADC, (π/4 DQPSK, 24.3 kS/s, 875 MHz, 0 dBm), RMS EVM: 0.3%

Option VM07 PDC, (π/4 DQPSK, 21 kS/s, 800 MHz, 0 dBm), RMS EVM: 0.6%

Option VM08 TETRA, (π/4 DQPSK,18 kS/s, 420 MHz, 0 dBm), RMS EVM: 0.7%

32QAM, (6 MS/s, 5.8 GHz, Root raised cosine filter, 0 dBm), RMS EVM: 1.6%

256QAM, (6 MS/s, 2.45 GHz, Root raised cosine filter, 0 dBm), RMS EVM: 1.1%

TSG4100A-ATT Option

Nominal impedance: 50 Ω

Nominal attenuation: 30 dB

Frequency range: DC to 6 GHz

Attenuation deviation: ±0.75 dB (DC to 6 GHz)

Maximum VSWR: 1.15 (DC to 4 GHz)
1.2 (4 GHz to 6 GHz)

Power rating: 5 Watt average power up to 25 ˚C ambient temperature, linearly derated to 1 Watt at 125 ˚C ambient temperature.

Weight: 0.052 kg

Operating temperature: -65 °C to 125 °C

Compliance: 2011/65/EU (RoHS) compliant

Rear-panel markers

Type: Symbol Clock, Data Frame, TDMA, and user-defined

Amplitude: 0.5 to 4 V_pp (–2 dBm to +16 dBm)

Output impedance: 50 Ω, AC coupled

Physical characteristics

Dimensions

Height: 114 mm (4.5 in)
Width: 216 mm (8.5 in)
Depth: 347 mm (13.7 in)

Weight: 5.4 kg (12 lbs)

Operating characteristics

Temperature

Operating: +5 °C to +40 °C
Non-operating: -20 °C to +60 °C

Humidity

Operating	Non-operating
5% to 95% relative humidity (%RH) at up to +30 °C	5% to 95% RH (Relative Humidity) at up to +30 °C
5% to 45% RH above +30 °C up to +40 °C, non-condensing	5% to 45% RH above +30 °C up to +40 °C, non-condensing

Altitude

Operating: Up to 3,000 m
Non-operating: Up to 12,000 m

Line power: <90 w="" 90="" to="" 264="" vac="" 47="" to="" 63="" hz="" with="" pfc="" dd="">

Vibration and shock

Random vibration

Operating	Non-operating
0.27 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Option M01)	2.28 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Option M01)
0.22 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Options M00 or E1)	2.13 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Options M00 or E1)

Mechanical shock

Non-operating
Half-sine mechanical shocks, 50 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Option M01)
Half-sine mechanical shocks, 30 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Options M00 or E1)